T&J Rescue - TL-9 STABILIZER
$780.00
The TL-9 Stablizer Plate, made for Holmatro Spreaders, provides the maximum stablization for rapid lift
We are only able to sell this bracket for use with Holmatro Tools.
The TL-9 Stabilizer allows for a rapid lift with maximum stabilization
- Constructed with ½ inch AS-36 Steel
- Compression tested to 50 tons
- Works will all hydraulic spreader units
- Custom made to fit your spreader within an 1/8 of an inch
- Rapid set-up and operational time, user friendly, extremely efficient, safe and simple to operate
- Solid construction features provide for unparalleled lateral stability when compared to any other set up of this nature
- The TL-9 is made from half inch solid steel, with a 6 x 6 base plate, and 4 1/2 inch gusseted towers spaced approximately 2 inches apart.
Behold the TL-9 stabilization device. The solid base plate increases the contact surface area with the ground while the towers provide lateral support for the tool. In addition, there is a solid steel traveling limit pin between the towers that prevents the spreaders from opening beyond 70%. At 70%, lift heights have ranged between 19-30 inches depending on the H.R.T. unit. When the traveling pin reaches the tops of the towers it locks the lower tip of the spreader into a groove at the front of the plate which works to increase overall stability.
The TL-9 is currently available for Holmatro Equipment. Each model will allow for only a 1/8 inch of clearance when the tips are inserted to achieve maximum lateral stabilization.
We are able to ship to Mass, Maine, New Hampshire and Vermont.
What They Are Saying
“The TL-9 is a long overdue breakthrough that fills a void in rapid extrication scenarios. It’s simple, safe, functional, rugged, and most important- it works perfectly for what it’s intended to do!”
“It’s about time someone in our industry finally figured out a way to quickly and safely lift a load off a victim without deploying half the rescue box to do it! The TL-9 is a must have”
“Finally- a “street smart fireman’s” quick, safe and practical solution to getting a victim out from beneath a load, and a single company can put it into service in less than a minute…long overdue!”
“Not sure what took us so long to figure this one out, but the TL-9 has it mastered. Safe, quick, simple, stable and effective…the hallmarks of any successful rescue operation.”
| Manufacturer | T&J Rescue |
|---|