NEW FEATURES

Our auto cascade system has replaced all operations panel-mounted valves and pressure gauges which help reduce human error when filling SCBA and SCUBA cylinders.

All system controls are within the panel-mounted HMI and include:

1. Air storage controls
2. Independent SCBA fill pressures
3. Independent SCBA fill speed
4. Automatic cascade control system rated for 7000 psi service
5. A secure and quicker way to log into the unit with a BAUER key fob

Manual cascade bypass control comes standard to fill cylinders in case of a system power loss.

SYSTEM FOOTPRINT

DIMENSIONS L X W X H inches (mm)

• 101" x 38" x 80" (2565 mm x 965 mm x 2023 mm)
  

WEIGHT pounds (kg)*

• 4350-4550 lbs (1973-2064 kg)
  

*Weights are based on a unit equipped with 4 ASMEs

Compressor Compartment

• Capable of accommodating a 13 to 26 scfm charge rate
• Insulated cabinet design for “against the wall installation”

STANDARD SCOPE OF SUPPLY

• BAUER breathing air purification system with B-SECURUS
• BAUER 15-inch HMI touch-screen interface
• Solid-state auto cascade system
• Compressor low oil pressure and high-temperature safety shutdowns
• Emergency stop push button
• Ergonomic system-operations panel
• Ergonomically designed stainless steel fill adaptors with integral bleed valve
• Automatic condensate drain system with non-corrosive condensate reservoir and integrated float sensor and automatic “Full” indication and compressor shutdown
• Two (2) ASME code stamped air cylinders are installed in an integral rack designed to hold four cylinders
• NFPA 1901 2016 edition compliant 3 position containment fill station accommodates SCBA or SCUBA cylinders up to 31” overall length
• RFID Reader, which reads and records data from the RFID-equipped cylinders

AVAILABLE ACCESSORIES (Factory Installed):

• BAUER Gas-Tek™ CO monitoring system
• Hose reel for 100’ of high-pressure breathing air hose
• Reg/RF
• Dual Fill/3 position
• Tri Fill/3 position
• Additional air storage cylinders